Shop fox SHOP FOX W1717, Инструкция по эксплуатации

Страница: 17 / 30

-15-
The motor mounting plate can be adjusted to
correctly position the main roller in relation to
the platen.
To adjust the main roller position, do these
steps:
1. UNPLUG THE SANDER!
2. Loosen the four motor mounting bolts
(
Figure 12 ).
3. Remove the sanding belt.
4. Place a straightedge against the platen and
check the roller clearance along the top and
bottom. The roller should be
1 ⁄
8
" behind the
platen. Figure 13 shows a top view of the
proper clearance.
5. Tighten the motor mounting bolts when the
proper clearance has been achieved
.
Figure 13. Proper platen to roller alignment.
Figure 12. Motor mounting bolts
(only 2 shown).
1
⁄
8
"
Roller Adjustment
Platen
Roller