-3-
D2260A Mini Mobile Base Instructions
3.
Determine how you will get the machine on the
mobile base.
— If the machine can be lifted, follow the
instructions in
Assembling Base,
and
Mounting
Machine onto Mobile Base
on
Page 11
.
— If the machine cannot be lifted, build the mobile
base around it, as instructed in
Assembling Base
Around Machine
on
Page 6
.
Lift heavy equipment carefully and with
the proper equipment. Get assistance is
if needed to reduce the risk of serious
personal injury.
Assembling Base
1.
Mount each swivel caster to a corner bracket that
has the four hole pattern and threaded posts using
(4) M8-1.25 x 16 hex bolts, 8mm flat washers, 8mm
lock washers, and M8-1.25 hex nuts, as shown in
Figure 5
.
2.
Mount each fixed caster to a corner bracket with the
eight hole pattern using (4) M8-1.25 x 16 hex bolts,
8mm flat washers, 8mm lock washers, and M8-1.25
hex nuts, as shown in
Figure 6
.
Orient the fixed casters so they point in the same
direction that your machine will typically be moved
(see
Figure
7
). Mounting the fixed casters in the
wrong direction will make it difficult to move your
mobile base.
Note
:
Patience is required when installing the
fasteners inside the bottom of the fixed casters due
to space constraints.
Figure 5.
Swivel caster mounted to corner
bracket.
x 4
x 4
OR
Threaded Post
Figure 6.
Options for mounting fixed
casters to eight hole pattern corner
brackets.
OR
x 4
Figure 7.
Mounting casters based upon
typical direction of movement.
Kpg`ZXc;`i\Zk`fef]Dfm\d\ek
KFGM@<NF=:8JK<I
:FII<:K
@E:FII<:K
x 4
