Shodex R I-502, Руководство по эксплуатации

Страница: 10 / 36

- 3 -
1) Construction : Deflection type
2) Refractive Index Range : 1.00 ～ 1.75
3) Range
: 2.5 ～ 5120 μRIU
4) Linearity : 6000 μRIU
5) Noise : 25 nRIU or less (Response : 1.5 seconds)
6) Drift : 2 μRIU/ｈ or less (Pure water 1mL/min, Purge OFF)
7) Response Time : 0.1 , 0.25 , 0.5 , 1.0 , 1.5 , 2 , 3 , 6 sec.
8) Auto Zero : Full automatic (Optical & Electrical Auto-Zero)
9) Base line shift : Range; 0 ～ 100μnRIU, Resolution; 0.5μRIU
10) Integrator Output : 0 ～ 1 V/FS (Sensitivity : 0.2 mV/μRIU , 0.8 mV/μRIU)
11) Recorder Output : 0 ～ 10 mV/FS
12) External Signal Input Auto Zero , Purge On / Off
( Contact Capacity : DC24V 0.1A min. )
13) External Signal Output : (1) Ready (Temperature control stable)
(2) Solvent Leak
(3) Error (One of following error occurred)
Home Position , Over heat , Optical Balance ,
Intensity ,
Thermistor disconnection
(Contact Capacity : DC24V 0.1A max.)
14) Temperature Control : OFF , 30 ～ 55 ℃ (1℃ increment) : 77℃ Temp. FUSE
(Note) External temperature control is set to a temperature
5℃ lower than the set temperature.
15) Operator Support Automatic Start Up ( Start Up Sequence )
Span / Validation Guide
16) External Communication : LAN
17) Cell Volume
: 8 μL
18) Maximum Flow Rate : 50 mL/min (mobile phase : pure water)
19) Pressure Rating : 50 kPa (0.5kgf/cm
2
)
20) Internal Volume : Inlet Port / Flow Cell : approx. 120 μL
Flow Cell / Outlet Port : approx. 540
μL
Total : 670 μL
21) Wetted Material : SUS316 , Teflon , Quarts Glass
22) AC Power Source : AC 100 - 240 V , 50 / 60 Hz , 150 VA (maximum)
Voltage fluctuation: ±10％ ,
Protection Class: Class Ⅰ
23) Installation Conditions Operating Environmental Conditions
Temperature : 10 - 30℃)
Humidity : 90％RH （Non-condensing）
Altitude : 2000ｍ (maximum)
Pollution : Degree 2
Installation : Category Ⅱ
24) Dimensions : 260 mm(W) x 165 mm(H) x 420 mm(D)
25) Weight : Approx. 12.5 kgs (28lbs)
26) Conforming Standards CE marking
EMC Directive (2004/108/EC)
Low Voltage Directive (2006/95/EC)
RoHS Directive (2011/65/EU)
3. Specifications
3. Specifications 3. Specifications
3. Specifications