Shire Norland Belsoe, Руководство по сборке

Страница: 14 / 30

1. Refer to the two window drawing pages and to letter codes in
contents table above . The WT (inner) and WD (outer) parts
will be at the top of the window frame.
2. To be sure you can lay all the pieces, including inserts together
without fixing to familiarise yourself with the assembly.
3. Make sure the window insert fits inside the frame with a 5mm
gap all around.
4. Lay out the parts WA and WB and WT as in the inner frame
assembly drawing. The narrowest (25mm) edge to the work
bench and the side the size is the same as the log thickness as
shown in fig A1 . Part
WT must be inside parts WA and part
WB underneath the two WA parts (Fig A1 ) .
5. Pre drill 2 3mm holes at one end of the WA only and at both
ends of the WB parts ( see drawing ) and screw together at
each corner,10mm in from the edge (ensuring each corner is
flush) with 2x50mm screw (fig A1).
Fig A1
7. Measure and mark the centre of the frame (684mm from the
outside fig A2 ) and position the WM piece (this is two pieces
of wood already fixed side by side), Pre drill 2 3mm holes in
the
WB and WT parts and fix with 2x50mm screws at each
end
Fig A2
8. Layout parts WC ,WD , WE & WJ on top of the previous
assembly as shown in the outer frame drawing.
Fig A3
9. Mark the first hole position 30mm from the end of part WC
that is adjacent to the WD part , at the other end central to the
WB part and then the between at approximately 300mm
centres .
10. Note the WC, WD & WE pieces fitted to the opposite side
must be drilled offset to this side to ensure the screws miss
each other.
11. Place the other WC part underneath and drill through both
pieces with a 3mm drill (fig A3).
Fig A4
12. Place one of the WC parts on top of the WA part level with the
inside of the frame and the bottom of the WT part (fig A4).
13. Fix to part WC to WA with 40mm screws ,spaced as before.
(fig A5 & A6)
14. important fix at both ends first ensuring that they stay flush
then the screws in between again ensuring that parts WA &
WC are flush as you go.
Fig A 5
Windows– Inc frame assembly
www.simplylogcabins.co.uk