PRODUCT VIAL
WATER VIAL
WHITE
CLEAR
Scenario C
Pull the plunger back SLOWLY to withdraw
any air from the vials.
This will force water into the PRODUCT vial.
Disconnect the syringe from the device.
Press the plunger to expel any air from
the syringe.
Reconnect the syringe to the device.
Swirl gently until the product
is completely dissolved.
Turn the device (with vials attached) over
so that the PRODUCT vial is on top.
SLOWLY withdraw the prescribed amount
of mixed product into the syringe.
Disconnect the syringe.
If you have withdrawn some solution
into the syringe, but cannot withdraw
the full volume,
inject all of the mixed
solution in the syringe back into the
device. Turn device (with vials attached)
over so that the WATER vial is on top.
If you cannot withdraw
any solution into the
syringe,
turn the device
(with vials attached) over
so that the WATER vial is
on top.
There is trouble withdrawing
some or all of the mixed product
into the syringe
First, make sure that the PRODUCT vial is on top.
