If water did not successfully
transfer, do the following:
1.
Place the WATER vial on the bottom
If WATER vial
is (correctly)
connected to
CLEAR side
If WATER vial
is (incorrectly)
connected to
WHITE side
If you are having
trouble withdrawing
some or all of the
mixed solution into
the syringe
Go to
SCENARIO A
Go to
SCENARIO B
Go to
SCENARIO C
2.
Identify the WHITE
and CLEAR portions of
the BAXJECT II device
3.
Determine which side of the device
is connected to the water vial:
White
Solution
Clear
Water
NOTE:
If these 3 troubleshooting steps fail to address the
problems you are having, please contact your doctor or
local Hemophilia Treatment Center.
BAXJECT II PRODUCT INFORMATION
Rx Only.
For safe and proper use of this device, please refer
to the instructions for use. The BAXJECT II device is intended
for use with a single vial of product and is for single use only.
Therefore, reconstitution and withdrawing a second vial into the
syringe requires a second BAXJECT II device.
