SOLUTION VIAL
WATER VIAL
WHITE
CLEAR
Scenario A
The WATER vial is CORRECTLY
connected to the CLEAR side of
the BAXJECT II device
Turn the device (with vials attached) over
so that the WATER vial is on top.
Remove the caps from the device and
the syringe.
Connect the syringe to the device.
Pull the plunger back SLOWLY to withdraw
any air from the vials.
This will force water into the PRODUCT vial.
Disconnect the syringe from the device.
Press the plunger to expel any air from
the syringe.
Reconnect the syringe to the device.
Swirl gently until the product
is completely dissolved.
Turn the device (with vials
attached) over so that the
PRODUCT vial is on top.
SLOWLY withdraw the
prescribed amount of mixed
product into the syringe.
Disconnect the syringe.
