7
BACK PANEL
BACK PANEL
1. DC POWER INLET:
The Switcher is fitted with a DC power plug input
connector. Ensure that the outlet type is approved and sufficient
to carry current connector capacity with the correct voltage and
connector polarity. 12Volt DC power supply 5A Max (Center pin
positive).
2. IR EXTERNAL IN (EXT. IR TO CONTROL SWITCHER):
Supports one of
IR Extender. Extend distance maximum 300 M / ~1000 ft. When
you plug the External IR extender into the switcher, the front panel
IR receiver remains active.
3. RS-232 CONNECTION:
RS-232 control port allows for interfacing to
a PC. Such as a computer or touch panel control, to the switcher
via this DB-9pin female connector for serial RS-232 control.
4. OUTPUTS- 1,2,3 & 4 HDMI:
Connect a signal link of HDMI direct
digital video/audio to this female HDMI connector. This connector
supports HDMI digital video/audio and DVI digital video sources.
HDMI Digital Video/Audio, Connector with fix screw Output 1 ~
Output 4
5. INPUTS- 1,2,3 & 4 HDMI:
Connect a signal link of HDMI direct
digital video/audio to this female HDMI connector. This connector
supports HDMI digital video/audio and DVI digital video sources.
HDMI Digital Video/Audio, Connector with fix screw Input 1 ~ Input 4
Power Jack:
DC Jack - Inner OD ᴓ 2.1mm (+ )
Outside OD ᴓ 5.5mm (GND)
Power input - 12VDC, 3A
IR Extender Jack:
Female Jack - inner OD O 3.5 mm
Remote port :
DB-9pin Female connector
HDMI digital video/audio connector:
HDMI Female connector.
Note: With the proper adapters, the
switcher can be used with DVI digital
video signals HDCP compliant. DVI does
not support audio.
HDMI digital video/audio connector:
HDMI Female connector.
Note: With the proper adapters, the
switcher can be used with DVI digital video
signals HDCP compliant.