17
RS-232 SERIAL INTERFACE CONNECT a PC or CONTROL SYSTEM. VERSION COMPATIBLE V2.0
RS-232 PROTOCOL COMMANDS (RS-232 Control driver V2.0)
The ShinybowUSA switcher can be controlled via the RS-232 serial
control port to allow for interfacing to a PC, or similar third party control
system.
The serial communication parameters are 9600 baud, 8 bit, No Parity
and 1 stop bit - this is often referred to as 9600 8N1. When the unit
recognizes a complete command it will perform the requested action -
there is no delimiter character required.
For a complete list of commands, please reference external document
extended RS-232 Protocol Instruction Manual.
RS-232 SERIAL CONNECT
Pin RS-232 Definition
1
------
Not used
2
TX
Transmitter
3
RX
Receiver
4
------
Not used
5
GND
Ground
6
------
Not used
7
------
Not used
8
------
Not used
9
------
Not used
RS-232 SERIAL INTERFACE