4
FRONT PANEL
FRONT PANEL
1. POWER SWITCH:
The power switch turns the unit on and off. The LCM will illuminate red to indicate that the switcher is ON and is receiving
power. The switcher will remember that last state during a power cycle. When power is removed and resorted, the last configuration will be
evoked.
2. INPUT STATUS DISPLAY:
Input sources 1 to 4 LCM illuminates blue to indicate that a video source is present on that input.
3. OUTPUT STATUS DISPLAY:
Each Output (destination) Channel shows which input (source) is assigned.
4. DESTINATION SELECT BUTTONS:
Separate outputs 1 thru 4 select buttons are provided for each destination assignment. Routing can be
Source to Destination or one source to multiple destinations.
Example : Press Destination 1, 3, 4 then press Source 2 will route Input 2 to Output 1, 3, 4 respectfully.
5. EDID MODE SELECT BUTTONS:
Used to select EDID mode using Input buttons #1 and #2.
6. IR SENSOR:
The IR sensor receives IR commands from the supplied remote controller or third party IR emitter.
7. SOURCE SELECT BUTTONS:
Separate inputs 1 thru 4 select buttons are provided each source selection.
15. 19 INCH EAR MOUNT PAIR:
Converts desktop to 19 inch rack mount. Bracket (part # 1U-440L) INCLUDED.
Image shows rack mount bracket attached.