5
REMOTE CONTROL
Before making any connections to the SB-4148. Observe the following:
Ensure the mains voltage supply matches the label on the supplied plug- Pack (+/- 10%).
Ensure that the power switch is OFF.
Ensure that all system grounds (earth) are connected to a common point.
Avoid powering equipment within a system from multiple power sources that may be separated by large distances.
Connect all audio video sources and destination equipment.
Power up all source and destination audio-visual sources.
For each destination output select the appropriate input source by using The front panel input 1-8 select buttons. The supplied IR remote control.
Or through the RS-232 serial communications port.
Upon power up the switcher will return to its last used setting before Powered down.
REMOTE CONTROL
1. & 2 SWITCH POWER ON or OFF:
Controller with a power ON and OFF
3. OUTPUTS: SELECTION 1-8 DESTINATION:
Output - 1 : Switch 4x VGA sources to #1 Destination-Monitor
Output - 2 : Switch 4x VGA sources to #2 Destination-Monitor
Output - 3 : Switch 4x VGA sources to #3 Destination-Monitor
Output - 4 : Switch 4x VGA sources to #4 Destination-Monitor
Output - 5 : Switch 4x VGA sources to #5 Destination-Monitor
Output - 6 : Switch 4x VGA sources to #6 Destination-Monitor
Output - 7 : Switch 4x VGA sources to #7 Destination-Monitor
Output - 8 : Switch 4x VGA sources to #8 Destination-Monitor
INPUTS: SELECTION 1- 4 SOURCES
Input - Source 1 VGA+Audio Signal source device #1
Input - Source 2 VGA+Audio Signal source device #2
Input - Source 3 VGA+Audio Signal source device #3
Input - Source 4 VGA+Audio Signal source device #4
HOW TO SETUP IR CODES:
IR TYPE : uPD6121G
POWER ON : 00FF 08F7
POWER OFF : 00FF 09F6
OUTPUT#1 / INPUT#1 0EF1 11EE
OUTPUT#1 / INPUT#2 0EF1 12ED
OUTPUT#1 / INPUT#3 0EF1 15EA
OUTPUT#1 / INPUT#4 0EF1 16E9
OUTPUT#2 / INPUT#1 0FF0 11EE
OUTPUT#2 / INPUT#2 0FF0 12ED
OUTPUT#2 / INPUT#3 0FF0 15EA
OUTPUT#2 / INPUT#4 0FF0 16E9
OUTPUT#3 / INPUT#1 AA55 11EE
OUTPUT#3 / INPUT#2 AA55 12ED
OUTPUT#3 / INPUT#3 AA55 15EA
OUTPUT#3 / INPUT#4 AA55 16E9
OUTPUT#4 / INPUT#1 8844 11EE
OUTPUT#4 / INPUT#2 8844 12ED
OUTPUT#4 / INPUT#3 8844 15EA
OUTPUT#4 / INPUT#4 8844 16E9
OUTPUT#5 / INPUT#1 CC33 11EE
OUTPUT#5 / INPUT#2 CC33 12ED
OUTPUT#5 / INPUT#3 CC33 15EA
OUTPUT#5 / INPUT#4 CC33 16E9
OUTPUT#6 / INPUT#1 DD22 11EE
OUTPUT#6 / INPUT#2 DD22 12ED
OUTPUT#6 / INPUT#3 DD22 15EA
OUTPUT#6 / INPUT#4 DD22 16E9
OUTPUT#7 / INPUT#1 EE11 11EE
OUTPUT#7 / INPUT#2 EE11 12ED
OUTPUT#7 / INPUT#3 EE11 15EA
OUTPUT#7 / INPUT#4 EE11 16E9
OUTPUT#8 / INPUT#1 FF00 11EE
OUTPUT#8 / INPUT#2 FF00 12ED
OUTPUT#8 / INPUT#3 FF00 15EA
OUTPUT#8 / INPUT#4 FF00 16E9
CONNECTING THE HARDWARE
Please study the panel drawings below and become familiar
with the signal input-output, Power requirements plus any
controls present.
Before using the switcher, please take the time to make certain
that the device you wish to connect to its input is functioning
properly in all respects. Verify that the video and audio signals
are present and are being displayed properly on a suitable
device.
If all is well connect the appropriate cables between the output of the device you wish to
distribute to output(s) of the switcher to the carious devices you wish to feed a signal to. Lastly,
connect the AC to DC adaptor, connect the DC connector to the switcher fi rst and then plug the
adaptor into a functional AC outlet.