BACK PANEL
BACK PANEL
4
1. DC POWER INLET:
The switcher is fi tted with a DC power plug input connector.
Please ensure that the plug used is of an approved type and is
of suffi cient current carrying capacity with the correct voltage and
connector polarity. 12Volt DC power supply 1A-2A Max.
2. RS-232 CONNECTION:
RS-232 control port to allow for interfacing to a PC, such as a
computer or touch panel control, to the switcher via this DB-9pin
Female connector for serial RS-232 control.
3. INPUT: 1~4 AUDIO DEVICE SOURCES:
Connect a Stereo Audio signal from 4x source devices and output
to 8x Stereo Audio speakers or devices.
4. INPUT: 1~4 VGA DEVICE SOURCES:
Connect a VGA (RGBHV) signal via 4x source of devises and
output to 8x VGA Monitors or displays
5. OUTPUTS: 1~8 AUDIO DESTINATION:
Connect 4x Stereo Audio signal to 8x speakers or devices via 2x
RCA Audio Cables.
6. OUTPUTS: 1~8 VGA-RGBHV DESTINATION:
Connect 4x VGA signal to 8x VGA Monitors or displays via H
D15P D-sub VGA cables.
Power Jack:
DC Jack - Inner OD Ø 2.1 mm (+)
Outside OD Ø 5.5mm (GND)
Power input -12VDC, 1A-2A
Switcher power suppler use universal
Part number: TA007
Remote port:
DB-9pin Female connector.
Stereo Audio(AR/AL) Via 1x Ø3.5mm ear phone jack
connector.
Note: With 1x female phone jack each channel.
VGA (RGBHV) Via 1x HD-15p connector.
Note: With 1x female D-Sub connector.
Stereo Audio(AR/AL) Via 1x O3.5mm ear phone jack
connector
Note: With 1x female phone jack each channel
VGA (RGBHV) Via 1x HD-15p connector
Note: With 1x female D-Sub connector