SHINPO SPRW, Руководство по эксплуатации

Страница: 10 / 20

SPRW_ENGLISH _101
9
Operating Instructions(Slim Control Type)
Before you turn on the power and open the Gas Shutoff, make sure the Burner Control Knob
is at Off position and that every direction in the “Preparation before use” section of this
manual has been precisely followed. Also make sure that the Exhaust Fan is operating
normally.
◆
Ignition
①
Slowly slide the Burner Control
Knob all the way to Ignition
position.
▼
When you try to ignite for the first time, you
may have some difficulty due to the air
remaining in the gas pipe.
▼
Remove the air completely and try again.
②
The Igniter makes a clicking sound and ignite gas.
Make sure gas is burning before you release the
knob.
▼
If the Burner fails to ignite, slide the Knob back to Off position.
▼
Wait for a while and try again.
▼
Make sure you wait long enough to disperse the gas within the
appliance to avoid an explosive ignition.
◆
Adjusting flame force
The flame strength can be adjusted in 3-step of High, Medium and Low by controlling the knob.
①
HIGH
→
MEDIUM
▼
Slowly shift the knob in left(in direction of STOP),
and it will stop at position of MEDIUM making a
clicking sound.
②
MEDIUM
→
LOW
▼
Further shift the knob in left slowly, and it will stop
at position of LOW making a clicking sound
①②
LOW/MEDIUM
→
HIGH
▼
Slowly slide the Burner Control Knob all the way
to IGNITION position.
▼
Release your hands, and it will stop at position of
HIGH.
①②③
LOW
→
MEDIUM
▼
Slowly slide the Burner Control Knob all the way
to IGNITION position.
▼
Shift the Knob in left, and it will stop at position of
HIGH and MEDIUM making a clicking sound.