6.
WARNING:
Never continue using the Winch until the vehicle’s 12 Volt DC Battery
is run down. You may wish to keep the engine running while using the Winch to
continually recharge the Battery. However, make sure the vehicle is in” neutral,”
the vehicle’s emergency brake has been set and, whenever possible, the vechicle’s
wheels have been chocked. Do not use a dirty, corroded, or leaking Battery to
avoid injury from possible acid burns, Always wear ANSI approved safety eye
goggles when working with or around a Battery.
7.
CAUTION: Carbon Monoxide is a colorless, odorless, vapor emitted from
the engine’s exhaust and may kill or injure when inhaled. Do not run the
engine in an enclosed area.
To Connect The Handheld Remote Control:
1. Lift the Rubber Seal on the left side of the Winch, and insert the Cord Plug (part#
8) into the Remote Control Socket. Then, set the Remote Control Housing in a
safe place until ready for use.
(See Figure D.)
7
REMOTE
CONTROL CORD
POWER IN/
POWER OUT
SWITCH (#10)
REMOTE CONTROL
HOUSING
CORD PLUG (#8)
REMOTE CONTROL SOCKET
BLACK RING
CONNECTOR
RED RING
CONNECTOR
WIRE HAEMESS
ASSEMBLY (#64)
REMOTE
CONTROL
SOCKET
-
NEGATIVE
+
POSITIVE
VEHICLE BATTERY
(NOT INCLUDED)
FIGURE D
FIGURE C
