5
4.3 Setup
Press POWER key while the MODE key is being pressed, when power to the instrument is OFF
As function setting mode items are indicated, set up the specification setting.
However, if factory adjusted values are going to set, it is unnecessary to implement the setup.
After specification setting is complete, power is turned off automatically.
[Measuring mode]
Power OFF
+
POWER
[Function setting mode]
[Auto-Power-Off function selection]
[Sensor selection]
[Temperature unit selection]
[Decimal point indication selection]
[Immersion type thermocouple measuring mode selection]
[Time setting]
P.HOLD EI
[Timer start temperature setting]
P.HOLD EI
• Selects the temperature unit with the
or
key
Sensor type: Thermocouple (K, R, B, S), RTD (Pt100), Thermo-hygro
sensor (HUM) [6 types]
• Selection item:
( ) and
( )
•
Factory adjusted:
• Selects the use of decimal point
999.9 ( ) or lower with the
or
key
.
• Selection item: With decimal point
(
), Without decimal point (
)
•
Factory adjusted: With decimal point
• Selects whether immersion type thermocouple can be used or not with the
or
key.
•
Not indicated when RTD (Pt100) or Thermo-hygro sensor is selected in the [Sensor
selection]
• Selection item:
Normal measuring mode (
), Immersion type
thermocouple measuring mode
(
)
•
Factory adjusted: normal measuring mode
• Selects the Auto-Power-Off time with the
or
key
• Selection item
: Not used (
), 10 min. (
), 30 min. (
), 60 min. (
)
•
Factory adjusted: 10 minutes
• Sets the measuring time after timer starts with the
or
key.
• However, when measuring time is set to 0, Peak HOLD works.
•
Indicates only when [Immersion type thermocouple measuring mode
selection] is selected.
• Setting range: 0 to 60 seconds
•
Factory adjusted: 0 seconds
• Sets the timer starting temperature with the
or
key.
Starts timer at the setting temperature. However, when 0 is set in the Time setting,
Peak HOLD activates and the setting becomes ineffective.
•
Indicated only when [Immersion type thermocouple measuring mode] is selected.
• Setting range:
500 to input scale high limit value or 900 to input scale high
limit value
•
Factory adjusted: 500
• Selects sensor type with the
or
key.
Sensor type: Thermocouple (K, R, B, S), RTD (Pt100), and Thermo-hygro
sensor (HUM) [6 types]
• Selection item:
K ( ), R ( ), B ( ), S ( ), Pt100 (
) and HUM (
)
•
Factory adjusted: K
