Shinko Electric CHC-S1245-5 Скачать руководство пользователя страница 43

Страница: 43 / 49

YQE8-J0092E

Check

Item

Probable Cause

Corrective Action

Gear of DC Motor (Thermal Head

Up/Down) does not have adequate

grease.

If the DC Motor Gear does not have adequate grease, apply

some grease to the gear.

(Refer to Section 2.7 of this document)

Cam for Thermal Head contact does

not have adequate grease.

If the cam for Thermal Head contact does not have adequate

grease, apply some grease to the cam.

(Refer to Section 2.7 of this document)

Sticking is occurring due to Thermal

head voltage setting failure.

Use digital voltmeter to verify that each DC output value is

correct. If it is not correct, adjust the DC output on the DC

Power Supply. (Refer to Section 3.1 of this document)

If the value is still incorrect, replace the DC Power Supply

４

Defective DC Motor ASSY (Ribbon

Winding)

Replace DC Motor ASSY (Ribbon Winding)

６

and if it

works, the original part is defective.

Gear of DC Motor ASSY (Ribbon

Winding) does not have adequate

grease.

If the DC Motor Gear does not have adequate grease, apply

some grease to the gear.

(Refer to Section 2.7 of this document)

Defective Main Motor (Paper Feed)

If Main Motor (Paper Feed) works abnormally, the Main

Motor may be defective. Repairing at manufacturer is

required.

Lack of Tension on Timing Belt

Adjust the tension of timing belt, referring to Section 3.2 of

this document.

If there is defective, replace

Timing Belt (Feed Roller Drive) 18 ,

Timing Belt (Feed Roller Drive) 19 or

Timing Belt (Roll Paper Drive) 20 .

Defective PCB HSSV7-CONT-F

ASSY.

Replace PCB HSSV7-CONT-F ASSY

１

and if it works,

the original part is defective.

Foreign Object on Paper Path.

Verify that there are no foreign objects in the paper path.

Defective Paper Cutter Unit

Replace Paper Cutter Unit 10 and if it works, the original

part is defective.

Cable contact to the rotating section of

cooling fans.

Verify that there is no contact of the cable to thermal head

cooling fan or DC Power Supply cooling fan. If there is

contact, verify whether there is damage. If there is no

damage, tie the cable in a bundle so as not to contact thermal

head cooling fan or DC Power Supply cooling fan. If there

is damage, repairing at manufacturer is required.

Содержание CHC-S1245-5


















































Результаты поиска

Содержание CHC-S1245-5

Отзывы:

Похожие инструкции для CHC-S1245-5

Бренды по названию

Популярные бренды

Shinko Electric CHC-S1245-5, Инструкция по техническому обслуживанию

Результаты поиска

Содержание CHC-S1245-5

Отзывы:

Похожие инструкции для CHC-S1245-5

Бренды по названию

Популярные бренды