Shinko Denshi FS100K1G Скачать руководство пользователя страница 73

Страница: 73 / 108

FS series operation manual

8 Controlling and adjustment functions

－

8-11

Password cancellation history

This function is used for checking the password cancellation history. 100 history records are

stored in all.

Select a setting menu.

Select the password cancellation history.

(“2-7-2 Operation of the setting menu, setting of

various functions” and “8-1 Hierarchy of controlling

and adjustment functions”)

Select the password cancellation history.

Push the [Direction] key.
Select “61A.PH.”

Select a history to be checked.

Push the [Enter] key.

The indication changes to “HIS. 1”.

Push the [Direction] key.

With each pushing of the [Direction] key,
the indication changes to “HIS. 2”, “HIS.
3” ----- till “HIS. 100”.

Confirm the history.

Push the [Enter] key.

The indication changes to “Date”.

With each pushing of the [Enter] key,
the indication changes to “Time”,
“PASS 0” and “Date” sequentially.

The indication returns to the history
selection in the end.

The operation mode returns to the scale mode.

Return to the scale mode with the
[Shift] and the [Clear Home] keys.

Содержание FS100K1G













































































































Результаты поиска

Содержание FS100K1G

Отзывы:

Shinko Denshi FS100K1G, Руководство по эксплуатации, Страница: 73 / 108

Результаты поиска

Содержание FS100K1G

Отзывы: