Shining Stars V12, Руководство пользователя

Страница: 23 / 33

- 22 -
its not effected by wind rain and wet. the quality is dependable, durable and enduring,the length
of use of pulse transmission belt is 2500 hours, if you exercise 10 hours per week, you can use
it for 5 years.
（
5
）
Power saving mode:
This system has power saving function, at the standby state, if there is not any button pressing
instruction input in 4 minutes, system enter into power saving mode, shut down display
automatically,press any key can wake up system.
（
6
）
MP3
When the power is connected, connect MP3 or other audio devices, meter can play music.
1.When plug SD card and U disk, the volume is controlled on the meter, song choosing and
pausing is also controlled on the meter.
2.When only connect external MP3,volume is controlled on the audio devices, songs choosing
and pausing is also on the audio devices.
（
7
）
Metric Inch system change and incline adjustment
1.Press start button, take off safety key, then connect the safety key, can enter into metric and
Inch system switching, speed window display, press speed up or speed down ,choose metric
and Inch system (“SI” signify metric system, ”Eng” signify Inch system),after choosing, press
start button to confirm and drop out to standby state.
2.At the standby state, press speed+, speed-,, incline- buttons at the same time for 3
seconds, enter into incline automatically adjustment, after finishing adjustment, enter into
standby state.
（
8
）
Errors display
（
Simple troubleshooting methods
）
：
8.1 fault description:Er-1 power on, no reaction signal in the computer
Fault processing:
8.1.1 check the line in the computer
8.1.2 check the connection line between the computer and the controller
8.2 fault description:Er-2 incline system failure
Fault processing:
8.2.1 check the signal line of the incline motor
8.2.2 check the incline motor if it is damaged
8.2.3 check the controller if it is damaged
8.3 fault description:Er-3 over-voltage protection
Fault processing:
Check the power voltage is on normal range:AC220-240V
8.4 fault description: Er-4 over-current protection
Fault processing:
8.4.1 check whether treadmill moving parts stuck
8.4.2 check whether lack of lubricating oil,if the lack of the lubricating oil,can increase the
running friction between the running belt and the running board;
8.4.3 check whether the running belt or running board is worn
8.4.4 check whether controller or motor damage.