Shini SICC-105WS-R3, Руководство пользователя

Страница: 42 / 53

42(53)
Items Setup contents Instruction
Running mode: Cooling/heating
Refer to control logic for detail and can not be set when
the unit is running.
Control temp.: 12
℃
Only Visible when cooling.
Control temp.: 25 ℃ Only visible when heating.
Weekly timing: Invalid Only effective when set into valid weekly timing.
Timing setup: Not setup Only effective when set into valid weekly timing.
Note: Timing setup
，
wait for you to set a valid start or stop time, if it is running, then that time is the timely
stop time, if it stops, then that time is for timely start time.
4.3.2 Weekly Timing Setup
Refer to 4.3.8 timing logic chapter.
4.3.3 The Operation Setup of the Compressor
Items Setup contents Instruction
#1 compressor Start Omit
#2 compressor Start Omit
#1 heater Start Omit
#2 heater Start Omit
Note: 1) When one compressor is set to be "forbidden", it is forbidden to start this compressor, if this
compressor is working, it will be stopped emergently. When the cooling requirement can be met
by partial compressors in their full load, other compressor can be set "forbidden". The default
value is "start".
2) When one heater is set to be "forbidden", it is forbidden to start this heater, if this heater is working,
it will be stopped. The de fault value is "start".
4.3.4 Time Setup
Picture 4-12
：
Time Setup