Shini SICC-105WS-R3, Руководство пользователя

Страница: 35 / 53

35(53)
4.2
Unit Running
4.2.1 Start Interface
Picture 4-2
：
Start Interface
The microcomputer will display start interface in 10 seconds after connected to
power.
1) The manufacturer can enter into the manufacturer setup interface by inputing
the right password; method: touch the upper central position of the
manufacturer logo to get a pop up for password entering, then input the right
password to get into.
2) Shows upper machine version (for example: DM23A-TY-F12M V1.12), lower
machine version ( for example: LY506A-V1.01), and unit type (for example:
water-cooled screw chiller unit, if the unit has no settings it will display: has
not setup) etc.
3) Press the central of the screen for 3 seconds, enter into calibration process,
complete the calibration process by following the indicated steps.
4) Softly touch the right below of the touch screen to skip the10 seconds delay
and directly enter into the main running interface.