Shini SAL-12U, Руководство пользователя

Страница: 27 / 33

27(33)
4.6.2 Alarms
Alarm display and trouble shooting.
Alarm light
symbol
Code Possible reasons Solutions Remarks
[A.01]
Material shortage alarm
[F.9]
1. The setting material
suction time is too short.
2. Unable to suck any
material..
3.Material suction pipe is
blocked,
4. No enough suction
power.
1. Add material.
2. Increase material suction
time.
3. Turn off the equipment and
check the pipes.
The alarm will be cleared
when the machine receives
material again, or by pressing
ENT on the control panel or
by cutting off power supply.
[A.03]
Filter alarm
Filter blocked.
1. Turn off the equipment for
cleaning filter screen or
replace it.
The alarm will be cleared by
cutting off the power or press
ENT on the control panel.
[A.04]
Alarm for no material
[F.10]
After the material shortage
alarm is up to certain
times, the stop alarm will
be given out.
Please refer to the solutions
of [A.01] or modify the value
of [F.10].
The alarm will be cleared by
cutting off the power or press
ENT on the control panel.
[A.05]
First carbon brush alarm
After the carbon brush has
been used for a certain
while, [F.14] will sound an
alarm.
Please replace the carbon
brush. This alarm will last for
5 minutes, and will repeat
every 15 minutes until the
service time record of the
carbon brush becomes 0.
[A.06]
Second carbon brush
alarm After the carbon
brush has been used for a
certain while, [F.15] will
sound an alarm.
Please replace the carbon
brush and reset the service
time record of the carbon
brush to be 0. This alarm will
last for 5 minutes, and will
repeat every 15 minutes.
[A.07]
Third carbon brush alarm
After the carbon brush has
been used for a certain
while, [F.16] will sound an
alarm.
Please replace the carbon
brush and reset the service
time record of the carbon
brush to be 0. This alarm
won
’ t stop until the service
time record of the carbon
brush becomes 0.
[A.08]
Data can not be stored
into
EEPROM. Please contact us to replace
the PCB.
--Denotes the light is off, *Stands for flash of the light.