Life is like riding a bicycle – in order to keep your balance, you must keep moving
Shinga BV | Molendijk Zuid 23B WZ Schijndel | The Netherlands | Tel: +3185 401 2738 | Email: [email protected] | KVK.:
Manual LCD display May 2015 - V3.4.2 EN
8
Through the multi-functional display unit option
“CUR”
,
you can check the battery status.
Total KM/Mileage (ODO)
、
Trip computer (TRIP)
、
Digital Voltage (VOLT)
、
Digital current (CURRENT)
、
Surplus mileage (RM) and Run time (TIME)
Malfunction/ Status display
Throttle stoppage
Motor stoppage
Controller stoppage
Power brake handle
Under Voltage Protection
Power support
2.
Functions control and setting.
Simple Start: On/Off switch, light switch, 6KM/HR auto
drive, Real time cruise control, Wheel diameter’s
setting, 5 mode assistance’s setting, Highest speed
setting, Automatic dormancy time setting, Backlight
brightness setting, startup mode, drive mode is set,
power sensitivity setting, dynamical disk type, voltage
grade setting, controller set current limiting values.
You can alter parameters through the menu options:
Speed, wheel diameter, 5-electric support stands,
maximum speed, auto stand-by, display illumination,
startup mode, power sensitivity, dynamical disk type,
voltage setting, predefined settings.
.
How to press the buttons.
There are 3 different ways to press:
Short (1 sec)
Long (2 sec)
Combination of pressing 2 buttons simultaneously (3
sec)
. Turning on display.
Press “
C
” button for 2 seconds to turn On display
.
U can press
“C”
(
1sec
) while driving to get access to
some functions and features. Pressing again to go to
next mode.
. Increase/decrease electric support.
Pressing one of these buttons while driving may
increase or decrease electrical power support (between
1-5)
short = 1 support stand higher/lower