Life is like riding a bicycle – in order to keep your balance, you must keep moving
Shinga BV | Molendijk Zuid 23B WZ Schijndel | The Netherlands | Tel: +3185 401 2738 | Email: [email protected] | KVK.:
Manual LCD display May 2015 - V3.4.2 EN
7
How to use the display unit:
1.
Functions Display.
To display speed, assistance display, battery indicator,
mileage, accumulative mileage, cruise constant speed,
malfunctions, brake indicator and headlight display.
* Turning On display will turn on backlight. Symbols are
shown black.
Head/rear Light
Current state grade (this function need controller’s
software support
Voltage status grade Power
Digital Speedometer. Max speed/average.
MPH or KM/U
Speed has 4 ways to come true
，
depending on the
specific way, partial way could compose.
1. Hall signal attaching electric motor
2. Controller send Hall signal of motor to meter
3. slow speed Hall signal as the type run a circle.
4. Controller send signal of slow Hall signal as type run a
circle to meter.
(single Hall cycle, Unit
：
1MS ) The meter could
calculate true speed according to the data of wheel
diameter and the signal’s data (electric motor’s Hall
need to set up the magnet steel’s quantities)
Power support assistance display.
(1-5)
Autodrive (6 KM/H)
Not available on E-Bikes equipped with older type
Torque sensor.