
Life is like riding a bicycle – in order to keep your balance, you must keep moving
Shinga BV | Molendijk Zuid 23B WZ Schijndel | The Netherlands | Tel: +3185 401 2738 | Email: [email protected] | KVK.:
Manual LCD display May 2015 - V3.4.2 EN
6
Manual LCD DISPLAY
Caution when using the LCD display. Do not plug display unit while bike is in power situation. Avoid bump and damage to the
display unit.
Display unit has a waterproof film. Do not remove or tear the foil. It will affect the water resistance of the display unit.
Changes to the parameter settings only to be set by Shinga BV or its dealer, otherwise the guaranty of the display unit will be
voided.
Guaranty will also be voided in situations like opening the display unit, damage to the connector, damage to the housing or
any other damages, like fire, water, dropping the unit and others.
Important notice:
According to the Dutch regulations an electric bicycle must be equipped with the following:
Two independent functioning brakes
Head light
Rear light
Spoke reflector, reflective tires or rimes
Pedals with reflectors
Front reflector (if not build in head light)
Rear reflector
Pre-ride checks:
Check on a regular basis the following components:
Brakes
Spokes
Lights
Bike bell
Tire tensions (minimum 3.5 bar, maximum 5.0 bar)
Tire profile
Securing the battery
Electrical system operations