User’s Manual for Palm Optical Fiber Tester
Shineway Technologies, Inc.
- 37 -
1. Connect optic link to the instrument, as in Figure27.
fange
Fiber to be tested
Optical Loss Tester
On
Off
λ
ShinewayTech
®
set
Ref
LS On
CW/MOD
Fun
Exit.Power
Zero
Loss
dB
dBm
uW
Fiber to be tested
F
IGURE
27.
T
ESTING
C
ONNECTION OF
O
PTICAL
L
OOP
L
OSS
T
ESTER
2. Press [Loss] after power on, and OLT-20 will automatically provide loss in the optic
link at 1310nm/1550nm wavelength.
To ensure the accuracy of measurement, optical connectors should be kept clean.
In the process of measurement, please always avoid looking directly into open
optic fiber, optical output, optical connectors or other laser source, for it might
cause eye injuries.
Notes during operation of all instruments:
Be sure to keep connectors and butt clean which must be kept free from dirt, oils,
or other contaminants.
Make sure optical output not scratched.
