User’s Manual for Palm Optical Fiber Tester
Shineway Technologies, Inc.
- i -
Safety Information
Safety Terms in This Manual
“WARNING” identifies procedures or practices that if not followed
could result in serious injury.
“CAUTION” identifies any procedure or practice that if not followed
could result in damage to the instrument or serious injury.
“NOTE” identifies information that may be beneficial during the use
and maintenance of the instrument.
SLS/VLS/OLT series is a laser instrument. Users should always avoid looking directly
into the optic output port. And the use of microscope or magnifier should also be avoided,
for the use of such devices can focus a highly intense beam onto the retina, which may
result in permanent eye damage.
Battery:
Battery for all palm optical fiber testers is a 9V lamination alkaline battery.
Please make sure to use the right type of battery.
Battery Power:
Do not expose batteries to fire or intense heat. Do not open or mutilate
batteries. Avoid touching the electrolyte in the batteries, which is corrosive and may cause
injuries to eyes, skin or damage to clothes.
External Power:
All hand-held instruments from our company support external power.
Power requirements: 9V DC@250mA. Power adapter is optional fitting.
Laser Radiation:
To avoid serious eye injury, never look directly into the optic
outputs of fiber optic network equipment, test equipment, patch cords, or test jumpers
.
Always avoid looking directly into the optic output port when the instrument is
