OFS-80
Optical Fiber Fusion Splicer User’s Manual
Shineway Technologies, Inc.
- 20 -
Make sure the fiber is not distorted.
Press [HEAT] to start tube heating. The buzzer beeps and the HEAT LED (orange color)
turns off when tube heating is completed.
Open tube heater lids and remove protected fiber from the tube heater. Apply some
tension to the fiber while removing it from the tube heater.
Visually inspect the finished sleeve to verify no bubbles or debris/dust is present in the
sleeve.
4. Menu Operation
Press
MENU
button to enter splicer menu, there are four main menus: 1.“Splice Mode
Menu”, 2.“Management Menu”, 3.“Maintenance Menu 1”, 4.“Maintenance Menu 2”, as
shown below:
1
2
3
4
：
Exit
：
Select
Splice Memory
Splice Option
Select Heater Mode
Select Splice Mode
+
Splice Mode Menu
1
3
4
：
Exit
：
Select
Power Save
Lang/
语言
+
Management Menu
2
English
1
2
4
：
Exit
：
Select
Sensor Value
Set Calendar
Clear Arc Count
Stabilize Electrodes
Replace Electrodes
+
Maintenance Menu 1
3
1
2
：
Exit
：
Select
Maintenance Info
Motor Drive
+
3
4
Maintenance Menu 2
Load Default
