KRFID EM Card Cabinet Lock SL-C10 Series User Manul
3-2
(10)Unlocking method: TM card unlocking
(11)Technical data:
Operating temperature: -30℃
～
80℃
Antistatic behavior: >15,000V, information can be save though in
strong static
Static Power Consumption: <5μA
Dynamic Power Consumption: about 200mA
Low voltage alarm: 4.8V
Relative humidity: <95%
3.
EM Card Lock Operation:
3.1 Initialization
To initialize the circruit board, please press the white button on the
circruit board for about 3 seconds( or use something acerose, like toothpick, to
jab into the small hole on the lock core). Blue light will be on during this process.
Loosen the button when you hear a sound of “beep”. At the moment that you hear
a long sound of “beep” with 5 short soundsof “beep” following, the lock is
initialized(all cards of the lock are cleared) and in the single-card-unlocking
mode.
If you press on the white botton again during the 5 short sounds of “beep”
and loosen it when you hear double sounds of “beep”, the lock would be into the
double-card-unlocking mode.
3.2 Single-card-unlocking mode:
1) Setting a Master card:
After initialization, take a EM card to contact
the EM reader. Two sounds of “beep” with blue light flashing indicate the card is
read and set as Master card.
Functions of a Master card:
opening the lock, adding unlocking cards
and clearing opening cards.
Opening the lock by the Master card:
take the Master card to contact
the EM reader and then take away the card, the lock would be opened.
When a Master card opens the lock, one sound of “beep” with blue light
flashing for 6 times indicate that this is a Master card in the
single-card-unlocking mode.
2) Adding unlocking cards:
Take the Master card to contact the EM
reader, then two sounds of “beep”, motor rotating and the lock opened(with lock
bolt back into the lock core) indicate the lock is in the state of adding unlocking
cards. You can add unlocking cards during the blue light flashing for 6 times --
take another EM card to contact the EM reader, one short sound of “beep”
indicates the card is read and set as unlocking card successfully. You can add
cards continuously, and 15 unlocking cards can be set at most.
3) Clearing all of the unlocking cards:
Take the Master card to contact
constantly the EM reader. If the card is read successfully, 5 rapid sounds of “beep”
