KRFID EM Card Cabinet Lock SL-C10 Series User Manul
3-3
with blue light flashing for 5 times and following 3 long sounds of “beep” with
blue light flashing for 3 times indicate that all of the unlocking cards are cleared.
3.3 Double-card-unlocking mode
1) Initialization:
Supply power, and then press the white button on the
circruit board for about 3 seconds( or use something acerose, like toothpick, to
jab into the small hole on the lock core). Blue light will be on during this process.
Loosen the button when you hear a sound of “beep”. During the period that you
hear 6 sounds of “beep” following (1 long sound and 5 short sounds), press the
white button again, then you will hear double sounds of “beep” with blue light
flashing twice. Double sounds with light flashing twice repeat 5 times indicate
the double-card-unlocking mode is initialized successfully.
2)Setting the Master card:
After initialization, take a EM card to contact
the EM reader, then two sounds of “beep” with blue light flashing twice indicate
the card is read and set as Master card. When the door unlocked by Master card,
there would be a sound of “beep” from the lock with blue light flashing 6 times,
which indicate this is the Master card in the double-card-unlocking mode.
3) Adding unlocking cards:
Take the master card to contact the EM
reader, then one sounds of “beep”, motor rotating, the lock opened(with lock bolt
back into the lock core) and blue light flashing for 6 times indicate the lock is in
the state of adding unlocking cards. You can add cards during the blue light
flashing – take a guest card to contact the EM reader, a short sound with blue
light on indicates this card is read and setting as guest card successfully; next
take a service card to contact the EM reader, 1 short sound with blue light on
indicates this card is read and setting as service card①. At most, 14 service cards
can be added for a lock.
Double-card-unlocking mode: take the customer card to contact the EM
reader. One short sound with blue light flashing indicates the card is read
successfully. Then take a service card to contact the EM reader. Simple music with
blue lights on indicates the card is read successfully. At this moment, the motor
will rotate and door will be opened( with lock bolt back into the lock core).
*Note: In the double-card-unlocking mode, the first card added by the
Master card is guest card, and all of the following cards are service cards. When
unlocking the door, only when the customer card and a service card together can
the lock be unlocked. Which card to be read first is not required. Use two service
cards or two guest cards can not unlock the lock.
4) Clearing all of the unlocking cards:
Take the Master card to contact
constantly the EM reader. If the card is read successfully, 5 rapid sounds of “beep”
with blue light flashing for 5 times and following 3 long sounds of “beep” with
blue light flashing for 3 times indicate that all of the guest card and service cards
are cleared.
