background image

14

WARNING!

Remove all objects such as rocks, broken glass, nails, wire, or 

string, which can be thrown or become entangled in the cutting attachment.

CAUTION!

 

Do not push the rotating line into trees, wire fences or any material that could 

tangle or break line ends.

 

Operation of trimmer without a cutting attachment shield and using excessive 

line length can lead to premature clutch failure.

 

Operation at low rpm can lead to premature clutch failure.

CAUTION!

Use only flexible, nonmetallic line recommended by the manufacturer. Never use, for 

example, wire or wire-rope, which can break off and become a dangerous projectile.

Engine Operating Speeds

Operate at full throttle while cutting grass.

Trimming and Mowing Grass

Hold the grass trimmer so the trimmer head is angled slightly into the area to 

be cut. To ensure maximum trimmer-line service life, cut only with the tip of the 

trimmer line. Cut grass by swinging the unit’s trimmer head from left to right. 

Keep the trimmer head horizontal.

Edging

Tilt the handle about 100° to the left (from horizontal) and move forward, hold-

ing the trimmer or brushcutter vertically as shown.

Tilt the handle about 

100° to the left

Maintenance

WARNING!

Before performing any maintenance, repair, or cleaning work on the unit, make sure the engine and cutting 

attachment are completely stopped. Disconnect the spark plug wire before performing service or maintenance.  

WARNING!

Non-standard accessories, cutting attachment, or replacement parts may not operate properly with your unit and may 

cause damage and lead to personal injury.

IMPORTANT!

MAINTENANCE, REPLACEMENT OR REPAIR OF EMISSION CONTROL DEVICES AND SYSTEMS MAY BE PERFORMED 

BY ANY REPAIR ESTABLISHMENT OR INDIVIDUAL; HOWEVER, WARRANTY REPAIRS MUST BE PERFORMED BY A 

DEALER OR SERVICE CENTER AUTHORIZED BY ECHO,INC. THE USE OF PARTS THAT ARE NOT EQUIVALENT IN PER-

FORMANCE AND DURABILITY TO AUTHORIZED PARTS MAY IMPAIR THE EFFECTIVENESS OF THE EMISSION CON-

TROL SYSTEM AND MAY HAVE A BEARING ON THE OUTCOME OF A WARRANTY CLAIM.

General maintenance

NOTE:

Using non-standard replacement parts could invalidate your Shindaiwa warranty.

Operation (continued)

Содержание T282





























Отзывы: