Shindaiwa T272, Инструкция по эксплуатации

Страница: 8 / 16

8
ASSEMBLY
27007
Handle
Barrier Bar
Handle Retaining
Screws
Outer Tube
Figure 4
Barrier Bar Assembly
Handle Positioning Label
Nuts
Connect the Handle
to the Outer Tube.
1. Position the handle on the outer
tube forward of Handle Positioning
Label as shown in Figure 4.
2. Install the handle and barrier bar
onto the outer tube with the socket
head cap screws and nuts as shown
in Figure 4. Tighten the screws
finger-tight ONLY at this time.
3. Locate the handle in the best posi-
tion for operator comfort (usu-
ally about 10 inches ahead of the
throttle housing).
4. Secure the handle by alternately
tightening the four socket-head
screws in a diagonal or “crisscross”
fashion.