Shindaiwa DGW311DM, Руководство пользователя

Страница: 13 / 37

12
<Caution>
z
If the equipment is not leveled, you cannot obtain accurate oil level.
z
Do not overfill (over H line) the engine oil. The excessive volume of engine oil may damage
the engine (inside the cylinders)
■
Selecting proper engine oil
Use the engine oil for Diesel engine in proper viscosity, in
compliance with the ambient temperature.
<Caution>
z
Use the API class CD grade or higher.
Viscosity and Temperature
Temperature
Over +20
℃
+10 - +20
℃
-10 - +40
℃
Viscosity SAE30 SAE20 SAE10W/30
6-2 Checking Coolant/Water
Danger : Injuries
z
Close all doors and place locks during operating this equipment, to avoid injuries by uninten-
tionally touching cooling fan and fan belt.
Danger : Burns
z
Do not open the radiator cap while operating this equipment or immediately after stopping the
equipment, to avoid sustaining burns from hot vapor.
Caution : Burns
z
Do not touch the engine and muffler during operation and immediately after stopping the
equipment, for the temperature can reach extremely high.
Check to see if the coolant/water level is between FULL and LOW levels in the reservoir tank. If
the coolant/water is below the LOW level, fill the tank and the radiator accordingly.
6-2.1 Filling to the Reservoir Tank
①
Take out the reservoir tank to remove the cap.
②
Fill up the reservoir tank to the FULL level.
③
Install the cap back and tighten, and reinstall the tank to
the equipment.
6-2.2 Filling to the Radiator
①
Remove the top plate.
②
Remove the radiator cap.
UPPER LIMIT (H)
LOWER LIMIT (L)
REQUIRE LEVEL
SIDE DOOR
CAP
RESERVOIR TANK