Shindaiwa DGW310DMC, Руководство пользователя

Страница: 32 / 42

30
The circuit breakers react on the AC power supply circuit only. In the simultaneous use of welding and
generating, there may be happen overload to the engine. Refer to the following table and limit AC power use.
Limitation of AC Power Supply in the simultaneous use of welding and generating (60Hz)
DGW310DMC
Welding Output AC Power Output
Rod/Current Select 3-P Output (PF 0.8) 1-P Output
φ 2.0mm/60A Dual 9.3kVA 7.4kVA
φ 2.6mm/120A Dual 7.2kVA 5.7kVA
φ 3.2mm/140A Dual 6.4kVA 5.1kVA
φ 4.0mm/170A Dual 5.2kVA 4.1kVA
φ 5.0mm/240A Single 2.0kVA 1.6kVA
φ 6.0mm/300A Single 0kVA 0kVA
The 1-P figure shown is the total output of 1-P 100/110V and 200/220V.
DGW310MC
Welding Output AC Power Output
Rod/Current Select 3-P Output 1-P Output
φ 2.0mm/60A Regular 9.3kVA 7.4kVA
φ 2.6mm/120A Regular 7.2kVA 5.7kVA
φ 3.2mm/140A Regular 6.4kVA 5.1kVA
φ 4.0mm/170A Regular 5.2kVA 4.1kVA
φ 5.0mm/240A Regular 2.0kVA 1.6kVA
φ 6.0mm/300A Regular 0kVA 0kVA
The 1-P figure shown is the total output of 1-P 100/110V and 200/220V.
＜ ＜ ＜ ＜
Caution
＞ ＞ ＞ ＞
● Simultaneous use of Welding and AC Power is NOT available.
● Avoid simultaneous use in the case high welding quality is required.
10. Simultaneous use of Generating and Welding