background image

INTRODUCTION

C262

4

X7502341302

© 

02/21

 ECHO Incorporated

INTRODUCTION

Specifications, descriptions and illustrative material in this literature are as 
accurate as known at the time of publication, but are subject to change 
without notice. Illustrations may include optional equipment and 
accessories, and may not include all standard equipment.

Read and understand all provided literature. 
Literature contains specifications and 
information for safety, operation, 
maintenance, storage and assembly specific 
to this product. Scan QR codes for more 
information.

For additional literature, including safety manuals where applicable, or 
questions regarding terms used in this manual, visit:

https://www.echo-usa.com/manuals

OR

https://www.shindaiwa-usa.com/manuals

SERVICING INFORMATION

Parts/Serial Number

Genuine SHINDAIWA Parts and 
Assemblies for your SHINDAIWA 
products are available only from 
an Authorized SHINDAIWA 
Dealer. When you do need to buy 
parts 

always

 have the Model 

Number and Serial Number of the 
unit with you. You can find these 
numbers on the engine housing. 
For future reference, write them in 
the space provided below.

Model No. _________________ Serial No. _________________

Содержание C262





























































Отзывы: