Shindaiwa AHS242 Скачать руководство пользователя

Страница: 17 / 28

251027

Prior to each work day, perform the

following:

■

Remove all dirt and debris from

the engine, check the cooling fins

and air cleaner for clogging, and

clean as necessary.

■

Carefully remove any accumula-

tions of dirt or debris from the muf-

fler and fuel tank. Check cooling

air intake area at base of crank-

case. Remove all debris. Dirt

build-up in these areas can lead to

engine overheating, fire, or prema

ture wear.

Daily Maintenance

WARNING!

Always wear gloves when working

around the cutter assembly.

■

Clean any debris or dirt from the-

hedge trimmer cutter blades.

■

Lubricate the blades before use

and after refueling. Check the

cutters for damage or incorrect

adjustment.

■

Check for loose or missing screws

or components. Make sure the cut-

ter attachment is securely fastened.

■

Check the entire machine for leak-

ing fuel or grease.

■

Make sure nuts, bolts, and screws

(except carburetor adjusting

screws) are tight.

Remove all dirt and debris from the

engine and check the cooling fins

Cooling

fins

Cooling

fins

Cooling

fins

Maintenance

(continued)

10-Hour maintenance

(more frequently in dusty conditions)

CAUTION!

Never operate the unit if the air

cleaner assembly is damaged or

missing!

Unscrew

Fasteners

Loosen air cleaner cover screws

Air Filter

Element

CAUTION!

Before removing the spark plug,

clean the area around the plug to

prevent dirt and debris from getting

into the engine’s internal parts.

10/15-Hour maintenance

Remove and inspect spark plug

Remove and clean or replace the

spark plug.

■

Adjust the spark plug electrode gap to

0.6 mm (0.024 inch). If the spark plug

must be replaced, use only an NGK

BPMR8Y spark plug.

spark plug gap--all models

Clean the spark plug

and check the gap at

the electrode.

0.6 mm

(0.024 inch)

1. Close choke (cold start position).

This prevents dirt from entering the

carburetor throat when the air filter

is removed. Brush accumulated dirt

from air cleaner area.

Remove air filter cover. Brush dirt

from inside cover.

Replace filter if it is damaged, very

dirty, or the rubber sealing edges

are deformed.

■

Lightly brush debris from filter.

■

Soak heavily soiled filters in water/

detergent solution to loosen dirt,

then brush lightly.

■

Rinse with clean water and allow to

dry completely before reuse.

Install air filter in air filter case.

Install air filter cover.

Содержание AHS242





























Результаты поиска

Содержание AHS242

Отзывы:

Похожие инструкции для AHS242

Бренды по названию

Популярные бренды

Shindaiwa AHS242, Руководство владельца/оператора

Результаты поиска

Содержание AHS242

Отзывы:

Похожие инструкции для AHS242

Бренды по названию

Популярные бренды