Shindaiwa 80575B, Инструкция

Страница: 4 / 8

- 4 - P/N X7672231900
Install The Handle Assembly With The Barrier
Bar
Install The Gear Case
1. Install the gear case onto the main pipe. Align the
locating hole on gear case with locating hole (L)
in the main pipe. Install the locating screw and
tighten the clamping bolt(s).
One Bolt Gear Case (gear case ratio 1.62:1) :
Two Bolt Gear Case (gear case ratio 1.57:1)
Blade Assembly
CAUTION
Always install the debris shield. Operating the
unit without the debris shield installed can re-
sult in serious personal injury.
NOTICE
Use a new cotter pin each time a blade is in-
stalled. Do not reuse a cotter pin.
Refer to the specific gear case assembly diagrams on
the following pages.
The orientation and the order of the components must
match what is shown in the diagrams.
The rotation arrows on the blade must match the rota-
tion arrow (A) shown on the debris shield.
Note: The image of the blade is a representation only.