Shindaiwa 80575B, Инструкция

Страница: 2 / 8

- 2 - P/N X7672231900
Introduction
These are instructions to convert a grass trimmer to a
blade capable unit. This is not an Owner’s/Operator’s
manual. Information on how to operate and maintain
the unit can be found in the Owner’s/Operator’s man-
ual for the unit you are converting. This kit contains
a cutting attachment shield that has been redesigned
to provide better visibility and a larger cutting swath
when used as a grass trimmer.
Procedure
Remove The Existing Cutting Attachment Shield
1. Align locking hole (A) in adapter plate with
notch in edge of gear case and insert locking
tool (A).
2. Insert locking tool (B).
3. Turn line head (C) clockwise to remove it from
the shaft. Remove the locking tool.
4. Remove shield plate screws (D), shield plate (E),
plastic shield (F), and adapter plate (G). Retain
parts for conversion back to nylon line head op-
eration.
Remove The Gear Case
1. Remove gear case locating screw (H), loosen
gear case clamp bolt(s) (I), remove the gear case