Shinano Kenshi PTP 1, Руководство пользователя

Страница: 98 / 162

99
17.5. Getting recording information.
In any of the 3 recording states, you can get information about the
current status of the recording as follows:
In recording stand by, press and hold down the Number 5 key.
PLEXTALK will say "Level monitor" followed by the available
recording time on the SD card.
In recording pause mode, press and hold down the Number 5 key .
PLEXTALK will say "Pause" followed by the amount of recorded time
in the current section and the available recording time left on the SD
card.
During recording, press and hold down the Number 5 key.
PLEXTALK will say "Recording" followed by the amount of recorded
time in the current section and the available recording time left on the
SD card.
NOTE: If voice guidance during recording is set to "Guidance off",
you will not hear any of the above information during recording. You
will still hear the information in the recording stand by and recording
pause states.
NOTE: In addition to the information given above, PLEXTALK will
announce the current battery status, the currently selected recording
mode and sound quality setting and the input source.
17.6. Editing heading markers during recording.
Having already learned how to make a basic recording, you may now
want to start adding in some of the DAISY navigation features.
PLEXTALK enables you to set and cancel heading information either
during or after making the recording. Both methods work well and
you will find that the method you use will depend on the type of
recording you are making.
This section tells you how to set and cancel heading markers during
the recording process.