Shinano Kenshi PTP 1, Руководство пользователя

Страница: 44 / 162

45
When PLEXTALK is not playing, each time you adjust the volume, it
will beep and speak the volume level selected, for example, "Volume
16". It will play a higher pitched beep at the top and bottom setting
and will play a lower pitched beep at the middle position, where the
volume is set to 10. If you press and hold down either of the volume
keys, you will hear a series of beeps, to indicate that the volume
setting is changing, until you reach the highest or lowest setting.
Again the top and bottom settings have a higher pitched beep and the
middle setting has a lower pitched beep.
When PLEXTALK is playing, each time you adjust the volume, it will
beep but will not speak the volume setting selected. It will play a
higher pitched beep at the top and bottom setting and will play a
lower pitched beep at the position where the volume is set to 10. If
you press and hold down either of the volume keys, you will hear an
initial beep but no further beeps until PLEXTALK reaches the highest
or lowest possible setting. You will, however hear the playback
volume increase or decrease accordingly.
11.4. Changing the guide volume.
The internal speech generated by the PTP1 is called the guide
speech. The volume of the guide speech can be adjusted, either
along with the playback volume or separately. The guide volume can
be set on a scale from 0 to 20, in increments of 1, with 0 being silent
and 20 being the Highest possible setting.
If you wish the guide volume and playback volume to be adjusted
together, use the procedure detailed in the previous section. The
guide volume will increase and decrease as you adjust the playback
volume. If you wish to set the guide volume independently, do the
following:
To increase the guide volume, select “Select Guide Volume” from
menu and then press the Right key repeatedly until you reach the
desired level.
To decrease the guide volume, press the Left key repeatedly until you
reach the desired level.
批注
[
藤森
7]:
ガイド音量の確認