• Front lever
Push lever
b
F
at least
two - three times
before installing.
Lever
b
F
Operate at least 2 - 3 times
Pull the brake lever
(as when braking) to pass
the inner cable through the
shifting cable hole, and set
it in the outer casing.
Outer casing
Shifting cable hole
Inner cable
• Outer stopper
1.
Install the outer stopper to the down tube.
Tightening torque:
1.5 - 2 N·m {13 - 18 in. lbs.}
Direct mount seat (M5)
Outer stopper
Installation bolt
3mm Allen key
If the cable hook does not align with the shifting cable
hole, press lever
B
F
again until it does, and then install
the cable.
Cable hook
Make sure that the inner end is firmly seated in the
cable hook.
Cable hook
Inner end
Install the outer stopper for
the rear chainwheels with
the handle in the default
position.
Handle default
position
Push lever
B
F
at least 8 times
to make sure the mechanism
is in top gear
before installing.
Depress the brake lever, and then
pass the inner cable through the
cable hole.
• Rear lever
Operate at
least 8 times
Inner cable
Cable hole
Lever
B
F
Outer stopper
Inner cable
Outer casing
2.
Pass the inner cable through, and set the outer casing.
Be sure leave some excess in the outer casing, even if
cutting it to the full length of the handlebars.
Confirm
Make sure the outer
casing is firmly seated
in the outer stopper.
