Attach the same outer end cap to the cut end of the outer
casing.
Inserting the inner cable
Insert the inner cable into the outer casing from the end
with the marking on it. Apply grease from the end with the
marking in order to maintain cable operating
efficiency.
Installing the shifting cable
Cable used
• Inner cable (stainless steel)
• SP40 sealed outer casing (
➀
)
• SP40 outer casing (
➁
)
SEALED
SP40
SP40
f
1.2 mm
f
4 mm
f
4 mm
Cutting the outer casing
When cutting the outer casing, cut the opposite end to the
end with the marking. After cutting the outer casing, make
the end round so that the inside of the hole has a uniform
diameter.
Marking
Outer end cap
➀
➁
Wire lead
