Shimano SM-MA-F180P/P2, Руководство дилера

Страница: 33 / 39

33
To be continued on next page
MAINTENANCE
Replacing the brake hose
Caliper side (BL-M6000/BR-M6000/BR-MT500/BL-MT500)
The illustration uses BR-MT500/BL-MT500 as an example to explain.
1
(z)
Use a utility knife or other cutting tool
to cut the brake hose.
(z)
90°
NOTE
Use the utility knife safely and correctly in
accordance with its instruction manual.
TECH TIPS
If you are using TL-BH62, refer to the manual
accompanying the product.
2
(z)
(A) (A)
In order to check that the ends of the
brake hose are fitted securely into the
base of the brake hose mounts of the
brake calipers and brake lever, make
marks on the brake hose beforehand as
shown in the illustration.
(As a guide, the length of brake hose
inside the mount should be
approximately 14mm, measured from
the cut end of the brake hose.)
(z)
Approx. 14mm
(A)
Mark
3
(A)
(z)
(B) (C) (D)
(C) (E)
(y)
Pass the brake hose through the
connecting bolt and olive, as shown in
the illustration.
(y)
Direction of insertion
(z)
Grease the outside of the olive.
(A)
Brake hose
(B)
Connecting bolt
(C)
Olive
(D)
Cut end
(E)
Grease
NOTE
For installation to the built-in type frame, first
connect to the frame caliper the end of the
brake hose to which the banjo is not
attached.