Shimano SM-MA-F180P/P2, Руководство дилера

Страница: 22 / 39

22
MAINTENANCE
Adding Shimano genuine mineral oil and bleeding air
10
[1]
[2]
(z)
(z)
Set the lever unit to the horizontal
position as shown in the illustration and
tilt it in the direction of [1] by 30°, and
then carry out step 9 to check that there
is no air remaining.
Next, tilt the lever unit 30° in the
direction of [2], and carry out step 9
again to check that there is no air
remaining.
If any air bubbles appear, repeat the
above procedure until they stop
appearing.
(z)
30°
11
(B)
(A)
Plug the oil funnel with the oil stopper
so that the side with the O-ring attached
is facing downward.
(A)
Oil stopper
(B)
O-ring
12
(A)
Remove the oil funnel while it is still
being plugged with the oil stopper, and
then attach the O-ring to the bleed
screw and tighten it until oil flows out to
make sure that there are no air bubbles
remaining inside the reservoir tank.
(A)
O-ring
Tightening torque
0.5 - 1 N·m
NOTE
Do not operate the brake lever. If operated,
there is a risk of air bubbles entering the
cylinder.
13
Wipe away any oil that has overflowed.