Shimano SM-MA-F180P/P2, Руководство дилера

Страница: 21 / 39

21
To be continued on next page
MAINTENANCE
Adding Shimano genuine mineral oil and bleeding air
8
(A)
With the brake lever depressed, open
and close the bleed nipple in rapid
succession (for approximately 0.5 seconds
each time) to release any air bubbles
which may be in the calipers.
Repeat this procedure about 2 to 3
times.
Then tighten the bleed nipple.
(A)
7mm socket wrench
Tightening torque
4 - 6 N·m
9
If the brake lever is then operated, air bubbles in the system will rise up through the port
into the oil funnel.
Once the bubbles stop appearing, depress the brake lever as far as it will go.
It is normal for the lever to be stiff at this point.
(x)
Loose
(y)
Slightly stiff
(z)
Stiff
NOTE
If the lever does not become stiff, repeat the
procedures from step 5.
Lever operation
(x)
(y)
(z)