1.
2.
3
4
1
2
Tighten
Handlebar
Half grip
4 mm Allen key
Clamp bolt
Brake lever
Revo-shift lever
Indicator
Be sure to read these service instructions in conjunction
with the service instructions for the Inter-3 hub before
use.
Revo-shift lever operation
Turn the Revo-shift lever to shift to each of the three gears.
Installation of the lever
Install the lever as shown in the illustration.
1
2
3
Starting/Riding on sandy or rough road surfaces/
Riding up slopes/Carrying heavy loads/
Riding into head winds/When the light is illuminated
Riding on flat road surfaces
Riding at high speeds
……
……
……
Pedaling becomes heavier
3
Indicator moves toward
22.2 mm
Leave a gap of 0.5 mm
between the Revo-shift
lever and the half grip.
The straight section of the
handlebar should be 158 mm
or more in length; attach the
Revo-shift lever to this straight
section.
Use a brake lever band with a thickness of
4.3 mm or less so that it does not obstruct
the brake lever and the Revo-shift lever.
Tightening torque:
2.5 – 4 Nm {25 – 40 kgfcm}
Pedaling becomes lighter
1
Indicator moves toward
SI-6E80B
SERVICE INSTRUCTIONS
Revo-shift Lever
Before use‚ read these instructions carefully‚ and follow them for
correct use.
Bell Crank
Obtain, read and carefully service instructions when installing
parts. A loose, worn, or damaged parts may cause injury to the
rider. We strongly recommend that only genuine Shimano
replacement parts be used.
WARNING
CAUTION
Be sure to shift the lever one gear at a time, and reduce the
force being applied to the pedals during shifting. If you try to
force operation of the shifting lever while the pedals are being
turned strongly, your feet may come off the pedals and the
bicycle may topple over, which could result in serious injury.
Never place your foot on the bell crank. Doing so may cause
problems with gear shifting.
SL-3S35-
E
Bell Crank lll
Bell Crank lV
Cover fixing screw
Indicator cover
Installation of the shifting cable
1
Set the Revo-shift lever to .
Loosen the cover fixing screw, and then remove the indicator
cover.
Revo-shift lever side
Set to
1
Use a cable with one inner cable drum as the shifting
cable.
SIS-SP40 (4 mm dia.)
