22
5.
Check the friction torque.
• Securely install the switch stabilizer as shown in Figure 1.
• While pressing the switch stabilizer with your finger as shown in Figure 2, set the lever switch to the ON position and check
the friction torque.
Figure 2
Figure 1
4 mm Allen key
Switch stabilizer
Friction torque:
3.5 - 5.4 N·m {31 - 47 in. lbs.}
Note:
If adjusting the friction once more, be sure to
set the lever switch to the OFF position
while pressing the switch stabilizer with
your finger before making the adjustment.
6.
Check that the switch stabilizer is securely installed.
7.
Install the plate unit cover.
2 mm Allen key
Tightening torque:
1.0 - 1.5 N·m {9 - 13 in. lbs.}
Plate unit cover
