Shimaden SR80 Series, Инструкция по эксплуатации

Страница: 2 / 16

ǦʹǦ
Contents
Page
1. Introduction
1-1. Check before use ............................................................... 2
1-2. Matters requiring attention for use .................................... 2
2. Installation and wiring
2-1. Installation site (environmental conditions) ...................... 2
2-2. Mounting ........................................................................... 3
2-3. Drawings showing external dimensions and panel cutout . 3
2-4. Wiring ............................................................................... 3
2-5. Terminal arrangement ....................................................... 4
2-6. Terminal arrangement table .......................................... 4
3. Front panel
3-1. Drawing and names of parts .............................................. 5
3-2. Description of front panel parts ......................................... 5
M PV display (red) .............................................................. 5
N
SV display (green) .......................................................... 5
O
Action display LED ........................................................ 5
P
Key switches ................................................................... 5
4. Screens
4-1. Power application and initial screen display ..................... 5
4-2. Screen configuration ......................................................... 5
4-3. Key sequence .................................................................... 6
4-4. How to move from screen to screen .......................... 10
4-5. Data change on each screen ............................................ 10
4-6. Supplementary explanation about screens ....................... 10
5. Supplementary notes on key operation
5-1. AT ................................................................................... 11
5-2. Manual adjustment .......................................................... 11
6. Supplement
6-1. Measuring range list ........................................................ 12
6-2. Event type list ................................................................. 12
6-3. Event standby action ....................................................... 12
6-4. Event delay time .............................................................. 12
6-5. Set value Function ........................................................... 12
6-6. 2-output characteristics ................................................... 13
6-7. Error messages ................................................................ 13
7. Specifications ...................................................................... 13
ͳǤ–”‘†— –‹‘
ͳǦͳǤŠ‡ „‡ˆ‘”‡—•‡
This product is fully checked for quality assurance prior to shipment.
Nevertheless, you are requested to ensure that there is no error,
damage or missing components by confirming the model codes and
checking the external view of the product and the number of items
attached.
Confirmation of model codes:
Check the model codes stuck to the case of the product to confirm
that the respective codes represent what was specified when you
ordered the product, referring to the following table of codes:
Item Code and description
M
Series SR82, SR83, SR84
Input
1: Thermocouple
2: R.T.D. (Multi-range)
3: Voltage (mV) (programable-rage)
4: Current (4-20mA) (programable-rage)
6: Voltage (V) (programable-rage)
Output 1
Y: Contact I: Current P: SSR drive
voltage
V: Voltage
Output 2
Y: Contact I: Current
P: SSR drive voltage V: Voltage
N: None
Power supply
90: 100-240V AC 10: 24V AC
02: 24V DC
Event output
/ heater break alarm
0:None 1:Event
2:Event + heater break alarm (30A) *1
3:Event + heater break alarm (50A) *1
Remote input
*2
00: None
14: 4-20mA DC (Not insulated)
15: 1-5V DC (Not insulated)
16: 0-10V DC (Not insulated)
Analog output
*3
0: None 3: 0-10mV DC
4: 4-20mA DC 6: 0-10V DC
Communication *3
0: None 5: RS-485 7: RS-232C
8: CC-Link (only for SR83)
External input (DI)/
set value bias 0:Without
1:With
Special item
0:Without 1:With
R:Square root extraction
*1. Selectable only when Control Output 1 is Y or P. either of Heater break
alarm or Remote input is used.
*2. Either of Heater break alarm or Remote input is used.
*3. Either of Analog output or Communication is used.
Check the following items attached:
This instruction manual
1 copy
Unit decal 1 sheet
Current transformer (included in heater break alarm option) 1
Communication instruction manual
(Communication option) 1 copy
ͳǦʹǤƒ––‡”•”‡“—‹”‹‰ƒ––‡–‹‘ˆ‘”—•‡
(1) Do not use a hard or pointed object in operating the front keys.
They should be operated by touching them lightly with your
fingers.
(2) When you clean the instrument, wipe it lightly with a dry piece
of cloth. Solvents such as thinner should not be used.
ʹǤ•–ƒŽŽƒ–‹‘ƒ†™‹”‹‰
ʹǦͳǤ•–ƒŽŽƒ–‹‘•‹–‡ȋ‡˜‹”‘‡–ƒŽ ‘†‹–‹‘•Ȍ
Indoors
Location without direct sunlight
Location with no dew condensation
·
CAUTION
The instrument should not be installed in those places as listed below.
Its use in any of such places may cause trouble or damage or an
outbreak of fire:
(1) Where flammable gas, corrosive gas, soot, and dust or other
particles which can deteriorate insulation are generated or are
abundant.
(2) Where the ambient temperature is below -10°C or above 50°C.
(3) Where the relative humidity exceeds 90%RH or below the
dew point.
(4) Where highly intense vibration or impact is generated or
transferred.
(5) Near high voltage power lines or where inductive
interference is likely to be affected.
(6) Where dew drops or rays of the sun directly fall.
(7) Where the elevation is in excess of 2,000 m.
(8) Outdoors.
(9) Supply voltage fluctuation not to exceed 10% of the
Nominal supply voltage.
Note : Contact our representative or sales office for any problems with the
product, shortage of the attached components or any other matters
requiring clarification.
Note :
The environmental conditions belong to IEC60664
installation category II and the degree of pollution is rated
as 2 under this standard.