MIDI Control Config
The stability of MIDI Clock messages depends on the source, which may or may not be perfect (particularly when
Clock and CC messages are transmitted simultaneously). For best performance, the interval between two
consecutive messages should be set accordingly. We recommend setting the CC message interval to 17ms.
The Astronaut V is connected to the MIDI source via a MIDI Type A 6.3mm TRS jack. The wiring scheme is as follows:
MIDI 4 (Source) > TRS RING,
MIDI 2 (Shield) > TRS SLEEVE,
MIDI 5 (Sink) > TRS TIP.
Read more about MIDI standards here.
NB! The DIN5 standard allows for two connection types. Depending on the viewing angle, the pins may look
reversed. DIN5 connector pins have numeric signifiers; please refer to those in order to avoid any issues.
MIDI Implementation Chart
NB!
The CC11 (MIDI Expression) parameter is currently in development and doesn’t work yet.
Factory Reset
While in
Setup Mode
, press and hold the ON/HOLD and TAP/ALT footswitches until both LEDs light up in red. As soon
as the factory reset is finished, the pedal will return to standard mode (the ON LED doesn’t glow).
Don’t disconnect
the power supply from the pedal until factory reset is finished!
NB! The device’s internal memory is formatted as part of the factory reset process. Make sure to save any config files
or other data you wish to keep to another drive before starting the reset.
