Effects
(FX)
This bank contains various effects: delays, arpeggiators, complex effects and microsamplers.
Algorithm positions
are fixed
but you can freely edit the programs.
The LED above the ON footswitch glows red.
To select a program, set the PROGRAM knob to the desired position.
Programs in this bank correspond to MIDI PC messages 11-21. The values are shown in brackets in the list below.
Reverberation
(RV)
This bank contains various reverb algorithms ranging from traditional to experimental.
Algorithm positions are fixed
but you can freely edit the programs.
The LED above the ON footswitch glows blue.
To select a program, set the PROGRAM knob to the desired position.
Programs in this bank correspond to MIDI PC messages 00-10. The values are shown in brackets in the list below.
Hold Mode (Infinite Sustain)
Press and hold the HOLD footswitch for more than 0.3 seconds to simulate turning the DECAY knob to the max. In
this mode, reverbs become infinite or very long (2–5 minutes), delays go into maximum feedback, and the LED starts
flashing in various colors. Release the bypass switch to let DECAY go back to the setting of the knob.
The Force Roar and Force OctDn algorithms are already based on infinite sustain, so the HOLD footswitch instead
detunes the frozen signal while the PDL/TIME knob determines detune direction.
