Shibaura ST460, Руководство оператора

Страница: 12 / 126

1-9
PREVENTION OF FIRE OR EXPLOSION
1. Due to the flammable nature of some crop
materials, the risk of tractor fire can be high.
This risk can be minimised by frequent
removal of accumulated crop material from
the tractor. If oil leaks appear, correct the
fault by re-torquing the bolts or replacing the
gaskets as necessary.
2. When operating in flammable crop conditions,
check and remove all trash or debris from the
tractor each day, especially around the
engine area and exhaust system.
3. Sparks or open flame can cause the
hydrogen gas in a battery to explode. To
prevent an explosion carry out the following:
• When disconnecting the battery cables,
remove the negative (-) cable first. When
re-connecting the battery cables, connect the
negative (-) cable last.
• DO NOT short-circuit the battery terminals
with a metal object.
• DO NOT weld, grind or smoke near a battery.
4. Periodically check the tractor electrical
system for loose connections or frayed
insulation. Repair or replace any damaged
parts.
5. Sparks from the electrical system or engine
exhaust can cause an explosion and fire.
Before you operate the tractor in an area with
flammable dust or vapors, use a good
ventilation system the remove the flammable
dust or vapors.
6. Use a non-flammable cleaning solvent when
cleaning parts on the tractor.
7. A fire can cause injury or death. It is
advisable to have a fire extinguisher near or
on the tractor when operating in conditions
where a fire may occur. Ensure fire
extinguishers are serviced according to the
manufacturers instructions.
8. If a fire extinguisher has been used, always
recharge or replace the extinguisher before
operating the tractor in conditions where a
fire may occur.
9. DO NOT store flammable materials (oil
soaked
rags etc.) on the tractor.
TRANSPORT THE TRACTOR
1. To prevent the falling accident and serious
injury, before loading the tractor must be
ensure that;
• Stop the engine and apply the parking brake
of trailer.
• Place the tractor “Brake pedal lock plate” in
the locked position
• Remove the muddy soil or debris from tractor
wheels and tires.
• Keep the suitable visibility from operator seat
for loading.
• Use the running board or bridge, which have
suitable strength, width, and length.
• Fix the running board or bridge with trailer
floor firmly and securely.
2. DO NOT make sharp turn on the running
board, bridge or trailer floor when loading the
tractor.
3. Keep the tractor in the same gear when
loading the tractor. Do not coast or free
wheel on the running board or bridge.
4. To prevent the overturn of tractor, use the
reverse moving for running on uphill, and use
the forward moving for running on the
downhill of running board or bridge.
5. Fix the transporting tractor with trailer floor
firmly and securely by suitable strength rope,
hook, or chains.
6. To avoid traffic accident, Always check the
overhead clearance of transporting tractor.